
Thank you for reading our post, please rate this article at the end.
Reading Time: 4 minutesLast Updated on November 5, 2026 by Paul Clayton
The ESEE Laser Strike is a USA-made survival knife with a 4.75-inch 1095 carbon steel spear-point blade, removable canvas Micarta scales, a hollowed tang for storing a small fire starter or tinder, and a Kydex sheath. In short, yes, it is good: it is a tough, practical mid-size blade built around fire-making and bushcraft.
Below we break down the blade, handle, sheath, and field performance so you can decide if it fits your kit.
Table of Contents
Key Takeaways
| Feature | ESEE Laser Strike |
|---|---|
| Blade | 4.75-inch spear point, 1095 carbon steel, textured powder coat |
| Cutting edge | About 4.5 inches, plain edge |
| Overall length | About 10 inches |
| Thickness | About 3/16 inch |
| Weight | About 9.5 oz knife only |
| Handle | Removable canvas Micarta scales over a hollowed tang storage cavity |
| Sheath | Ambidextrous Kydex with clip |
| Made in | USA |
ESEE Laser Strike Overview

The Laser Strike started life as a TOPS Knives design and is now made by ESEE in the USA. It is a simple, no-nonsense knife: one slab of 1095 steel and two Micarta scales held on with screws. Its standout feature is the storage cavity hidden under the scales, which can hold a small ferro rod and tinder tabs so your fire kit stays with your knife.
For a wider comparison of blades in this class, see our roundup of the best survival knives for any adventure.
Blade and Steel
The 1095 carbon steel blade is tough, takes a very sharp edge, and is easy to resharpen in the field. ESEE heat treats it for toughness rather than maximum hardness, which suits batoning and prying. The spear-point shape puts the tip near the centerline for good control during drilling and detail work, while the straight edge is easy to sharpen.
The powder coat helps resist rust, but the edge itself is bare carbon steel. Wipe it dry after use and keep a light coat of oil on it, especially in wet or salty conditions.
Handle and Fire Kit Storage

The canvas Micarta scales are comfortable and grip well even when wet. Remove them and you will find a hollowed section of the tang that can hold a small fire starter, tinder, or a mini fishing kit. Check the contents now and then; the cavity is small and is a backup, not a full survival kit.
The handle has a lanyard hole and a finger choil, which lets you choke up for fine carving work.
Kydex Sheath
The Kydex sheath is ambidextrous, drains water, and has lashing holes along the edges for mounting to a pack. Retention is firm, with an audible click, and the included clip lets you carry it on a belt or attach it to gear in different orientations.
ESEE Laser Strike Field Performance
In the field, the Laser Strike handles feather sticks, notching, shelter building, food prep, and light batoning with ease. Its 3/16-inch spine is thick enough for hard use without being too heavy for carving. It is not a chopper or brush clearer; for that, a larger blade or hatchet is better.
To understand why this thickness is a sweet spot, read our guide on the ideal thickness of a survival knife.
Pros and Cons
Pros
- Tough, easy-to-sharpen 1095 carbon steel
- Hidden storage for a fire starter or small kit
- Comfortable, grippy canvas Micarta scales
- Secure, versatile Kydex sheath
- Made in the USA and backed by ESEE’s lifetime warranty
Cons
- Carbon steel needs regular rust care
- Pricier than budget survival knives, often around $150 to $200
- Too short for real chopping

ESEE Laser Strike FAQ
What steel is the ESEE Laser Strike made of?
It uses 1095 high-carbon steel with a textured powder coat finish.
Does the ESEE Laser Strike have a fire starter?
The handle scales come off to reveal a small storage cavity that can hold a ferro rod and tinder. Check what is included with your knife when you buy it.
What is the sharpening angle for ESEE knives?
ESEE knives are generally sharpened at about 20 degrees per side. Matching that angle keeps the edge strong for hard use.
Who originally made the Laser Strike?
The design was originally produced by TOPS Knives and is now made by ESEE.
Is the ESEE Laser Strike good for bushcraft?
Yes. Its size, spine thickness, and grippy handle make it well suited to carving, fire prep, and camp chores.
Final Thoughts
The ESEE Laser Strike is more than a good-looking knife. It is a durable, well-made bushcraft and survival blade with clever built-in storage and a great sheath. If you want a larger ESEE, see our ESEE 6P-B review, or compare it with the budget Schrade SCHF9.
Resources
- ESEE Knives product information
- Retailer specification listings for the ESEE Laser Strike




