
Thank you for reading our post, please rate this article at the end.
Reading Time: 5 minutesLast Updated on November 16, 2026 by Paul Clayton
The Camco 57341 Olympian Wave 6 is a quiet, flameless catalytic propane heater that produces about 3,000 to 6,000 BTUs and can warm up to roughly 230 square feet without electricity, making it a favorite secondary heat source for RVs, campers and cabins. It has no fan, so it’s silent and won’t drain your batteries. You must provide fresh-air ventilation and use carbon monoxide and propane detectors, as with any unvented propane heater. For more heat output, compare it with our Mr Heater Big Buddy review.

Table of Contents
Key Takeaways
| Feature | Details |
|---|---|
| Heat output | About 3,000 to 6,000 BTU |
| Heating area | Up to roughly 230 sq ft |
| Power | No electricity needed |
| Noise | Silent, no blower |
| Mounting | Wall mount or floor stand |
| Fuel use | About 1/4 lb of propane per hour on high |
| Price | Roughly $450 to $650 |
How a Catalytic Heater Works
Instead of an open flame, propane reacts with oxygen on a catalyst pad, releasing radiant heat at a lower temperature. That makes catalytic heaters efficient, quiet and less likely to blow out.
Radiant heat warms people and surfaces in front of the heater rather than blowing hot air around the whole coach. It feels a lot like sitting in the sun: you notice the warmth quickly when you are facing the pad, while the far end of a long trailer warms more slowly. Because nothing is burned in a flame, there is no flicker and no roar, and the pad glows only faintly or not at all.
Olympian Wave 6 Features
- Two heat settings for comfort and fuel savings
- Safety shutoff valve that stops gas if the pad cools
- Piezo ignition for easy starts
- Wall or floor mounting for flexible placement
- Low-pressure propane connection, usually to your RV’s propane system

Olympian Wave 6 Specifications
| Spec | Wave 6 (57341) |
|---|---|
| Adjustable output | About 3,200 to 6,000 BTU |
| Fuel consumption | About 1/4 lb per hour at maximum |
| Heated area | Up to roughly 230 sq ft (about an 18-foot RV) |
| Size | About 17 7/8 in. tall x 12 13/16 in. wide x 4 in. deep |
| Weight | About 12 lb |
| Fuel | Low-pressure LP gas, 3/8 in. SAE flare connection |
| Ignition | Built-in piezo starter |
Camco also makes a smaller Wave 3 (about 1,600 to 2,800 BTU) for vans and tiny campers and a larger Wave 8 (about 4,200 to 7,600 BTU) for big fifth wheels and motorhomes. Pick the size by the space you need to heat, not the biggest number, since an oversized heater just burns more propane and adds more moisture.
How Long Does a Propane Tank Last With a Wave 6?
At its top setting the Wave 6 uses about a quarter pound of propane per hour. A standard 20-pound tank therefore runs it for roughly 80 hours on high, and noticeably longer on low. A typical RV forced-air furnace in the 20,000 to 30,000 BTU range can burn through the same tank several times faster, and its blower fan also draws on your 12-volt batteries. That combination of low fuel use and zero battery draw is the main reason boondockers love catalytic heaters.
| Propane supply | Approximate run time on high |
|---|---|
| 1 lb disposable cylinder (with adapter and low-pressure regulator) | About 4 hours |
| 20 lb tank | About 80 hours |
| 30 lb tank | About 120 hours |
Real-world run times vary with the setting you choose, outside temperature and how often the heater cycles on and off.
Installation Tips
The Wave 6 can hang on a wall vertically or horizontally, recess into a cabinet with an optional kit, or stand on optional legs as a portable unit. It runs on low-pressure propane, so it connects to your RV’s existing regulated LP line or to a tank through a low-pressure regulator and hose. A permanent hookup should be done by a qualified RV technician, followed by a leak test of every fitting with soapy water or an approved leak detector. Mount it where nothing can fall against the face of the heater, away from beds, curtains and walkways, and follow the clearance distances in Camco’s manual.
Keep the dust cover on when the heater isn’t in use. Dust, aerosol sprays and cleaning chemicals can contaminate the catalyst pad and reduce output.
Pros and Cons
- Pros: Silent, no battery drain, efficient, steady radiant heat, compact.
- Cons: Needs ventilation, adds some moisture, requires low-pressure propane plumbing or regulator, slower to heat a cold room than a forced-air furnace.
Safety First
- Crack a window and roof vent whenever it runs.
- Install working CO and propane detectors.
- Keep clearance from curtains, bedding and walls as specified.
- Have propane connections installed or checked by a qualified technician.
Catalytic heaters are unvented, which means they use oxygen from inside your camper and release combustion moisture into it. The standard 57341 model has a safety shutoff that stops the gas if the pad cools, but it does not include an oxygen depletion sensor. Camco sells a separate ODS version of the Wave heaters if you want that extra protection. Either way, fresh air is not optional: run the heater with a window and a roof vent cracked open, test your carbon monoxide alarm before every cold-weather trip, and never use it to heat a sealed space. If your CO detector keeps chirping, read why RV CO detectors beep.
Moisture is the other trade-off. Expect some condensation on cold windows, and use a vent fan, a small dehumidifier or moisture absorbers to keep it under control. Our guide on keeping RV pipes from freezing covers other cold-weather steps.

Why You Should Buy the Olympian Wave 6
It’s ideal for off-grid RVers and boondockers who want heat without running the furnace fan. Compare it with the Coleman SportCat PerfectTemp, the Comfort Zone tank-top heater and the best RV heaters.
FAQ: Olympian Wave 6
Is the Olympian Wave 6 safe to use while sleeping?
Many RVers run it overnight with a window and roof vent open and working CO and propane alarms, but always follow Camco’s warnings. If you are not comfortable with that, warm the camper before bed, turn the heater off and use good sleeping bags.
Does the Olympian Wave 6 have an oxygen depletion sensor?
The standard 57341 model does not. Camco offers a separate ODS version of the Wave heaters, and ventilation plus a CO alarm is required either way.
How long will a propane tank last?
A 20-pound tank lasts roughly 80 hours on the high setting, and longer on low. That is far less propane than a typical forced-air RV furnace uses for the same hours.
Does it need electricity?
No. The piezo starter and the heater itself need no power, so it works with dead batteries and no hookups. That also makes it a handy backup when the furnace fails; see whether RV furnaces run on electricity.
Can I use it in a tent?
It’s designed for RVs and enclosed spaces with ventilation; tent use requires extreme caution.
Final Thoughts
The Camco Olympian Wave 6 catalytic heater is a quiet, efficient way to stay warm off-grid without draining your batteries. It sips propane, makes no noise and works well as a second heat source next to your furnace. Install it properly, always ventilate and keep CO and propane alarms working, and it will keep a mid-size RV comfortable through cold nights.
Resources
- Camco product manual and specifications
- CDC, carbon monoxide safety
- RV parts retailer specification listings for the Wave 3, 6 and 8




