
Thank you for reading our post, please rate this article at the end.
Reading Time: 4 minutesLast Updated on November 4, 2026 by Paul Clayton
The best small bilge pumps for kayaks, jon boats, skiffs and small powerboats are compact 12-volt submersible pumps rated around 350 to 800 gallons per hour (GPH), such as the Rule 25D, Rule-Mate automatic, Attwood Tsunami and Johnson Pump Ultima Combi. Choose an automatic pump or add a float switch if your boat sits in the water, size the pump for your boat’s length and bilge, and keep a manual pump on board as a backup. Real-world flow is often well below the rated GPH because of hose length, lift and voltage.
Table of Contents
Key Takeaways
| Pump | Type | Best for |
|---|---|---|
| Rule 25D (500 GPH) | Manual-switch submersible | Small boats with an existing float switch |
| Rule-Mate Automatic | Automatic submersible | Small boats that sit at a dock or mooring |
| Attwood Tsunami | Submersible | Easy replacements and tight spaces |
| Johnson Pump Ultima Combi | Automatic with integrated switch | Simple installs on small to mid-size boats |
| Seaflo Automatic Bilge Pump | Automatic submersible | Owners on a budget |
| Whale Supersub | Submersible | Boats with very little bilge depth |
| Manual hand or diaphragm pump | Manual | Backup for any boat, and small boats without batteries |
What Is a Bilge, and What Does a Bilge Pump Do?
The bilge is the lowest part of a boat’s hull, where water from rain, spray, leaks and wet gear collects. Too much water can make a boat unstable or even sink it. A bilge pump removes that water and sends it overboard. It’s one of the most important safety devices on any boat.
The Best Small Bilge Pumps
Models and sizes change, so check the current GPH rating, dimensions and switch type before you buy.
1. Rule 25D (500 GPH)
Type: Manual-switch submersible
A compact, proven 500 GPH pump that runs when you flip a switch or add a separate float switch.
Best for: Small boats with an existing float switch.
2. Rule-Mate Automatic
Type: Automatic submersible
Has a built-in water sensor, so no separate float switch is needed. Comes in several GPH sizes.
Best for: Small boats that sit at a dock or mooring.
3. Attwood Tsunami
Type: Submersible
A popular compact pump line available in sizes from about 500 GPH and up, with a cartridge-style motor on many models.
Best for: Easy replacements and tight spaces.
4. Johnson Pump Ultima Combi
Type: Automatic with integrated switch
Combines the pump and an electronic switch in one compact unit.
Best for: Simple installs on small to mid-size boats.
5. Seaflo Automatic Bilge Pump
Type: Automatic submersible
A budget-friendly automatic pump in several sizes.
Best for: Owners on a budget.
6. Whale Supersub
Type: Submersible
A low-profile pump designed for shallow bilges.
Best for: Boats with very little bilge depth.
7. Manual hand or diaphragm pump
Type: Manual
A hand-operated pump that works with no power at all.
Best for: Backup for any boat, and small boats without batteries.
Types of Bilge Pumps
- Centrifugal submersible pumps: the most common electric pumps; compact and high-flow, but they can’t run dry for long and don’t handle debris well.
- Diaphragm pumps: self-priming and handle debris better; often used as manual or secondary pumps.
- Automatic pumps: have a built-in sensor or work with a float switch to turn on when water rises.
- Manual pumps: hand-operated backups that work without power.
How to Size a Bilge Pump
| Boat | Common pump size |
|---|---|
| Kayaks, canoes and small dinghies | Manual pump or small 12V pump |
| Jon boats and skiffs up to about 16 ft | About 350 to 500 GPH |
| Small powerboats about 16 to 20 ft | About 500 to 800 GPH |
| Larger boats | Bigger pumps plus a backup pump |
Rated GPH is measured with no lift or hose restriction. Real flow can drop a lot, so many boaters size up.
What You Need to Install a Bilge Pump
- The pump and mounting bracket or base
- Smooth-wall discharge hose sized to the pump outlet
- Through-hull fitting placed above the waterline
- Float switch (unless the pump is automatic)
- Correctly sized marine wire, fuse and switch panel
- Waterproof connectors or heat-shrink butt connectors
- Optional bilge counter to track how often the pump runs
A bilge counter can reveal a slow leak you might not otherwise notice.
Maintenance Tips
- Test the pump and float switch before every trip.
- Keep the bilge clean so debris doesn’t clog the intake.
- Check wiring for corrosion.
- Keep the battery charged if the boat sits at a dock.
More boat-care tips: best mildew remover for boat seats.
Frequently Asked Questions
Do small boats need a bilge pump?
Many small boats benefit from one, and some boats are required to have a dewatering device. Check your local regulations.
What’s the difference between automatic and manual bilge pumps?
Automatic pumps turn on by themselves when water rises. Manual-switch pumps run only when you turn them on.
Can a bilge pump run dry?
Most centrifugal pumps shouldn’t run dry for long. Use a float switch or automatic pump.
What size bilge pump do I need for a 16-foot boat?
Many 16-foot boats use a pump in the 500 GPH range, plus a manual backup.
Why does my bilge pump keep running?
A stuck float switch, a leak or water flowing back through the discharge hose are common causes.
Final Thoughts
A small bilge pump is cheap insurance for any boat. Choose a reliable 12V pump sized for your boat, add a float switch or go automatic, wire it correctly and keep a manual pump aboard as backup.
Related reading: Does A Pontoon Boat Have A Bilge Pump.
Resources
- Rule, Attwood, Johnson Pump, Seaflo and Whale product specifications
- American Boat and Yacht Council (ABYC) bilge pump standards
- U.S. Coast Guard boating safety equipment requirements




