
Thank you for reading our post, please rate this article at the end.
Reading Time: 2 minutesLast Updated on October 29, 2026 by Paul Clayton
The cost of replacing a flexplate usually runs about $800 to $1,500 for most cars and $1,000 to $1,800 or more for trucks and SUVs, because the transmission has to come out to reach it. The part itself often costs roughly $150 to $650, and labor makes up most of the bill. Five things drive the final price: your vehicle, the transmission design, the part you choose, shop labor rates and any extra repairs done while the transmission is out.
Table of Contents
Key Takeaways
| Item | Typical range |
|---|---|
| Flexplate part | Roughly $150 to $650 |
| Labor | Roughly $600 to $1,500 |
| Total, cars and crossovers | About $800 to $1,500 |
| Total, trucks and SUVs | About $1,000 to $1,800+ |
| Common add-ons | Fluid, seals, gaskets: a few hundred dollars |
What Is a Flexplate?
A flexplate is a thin metal disc that connects the engine’s crankshaft to the torque converter on vehicles with an automatic transmission. It has gear teeth around the edge that the starter engages to crank the engine. It does the job a flywheel does on a manual transmission, but it’s lighter and flexes slightly as the torque converter expands.
5 Things That Affect the Cost of Replacing a Flexplate
1. Vehicle Make, Model and Engine
Larger engines, trucks and all-wheel-drive vehicles take longer to work on, which raises labor costs.
2. Transmission Design
Some transmissions drop out from underneath fairly easily. Others need the engine lifted or partly removed, adding hours.
3. Parts Choice
Quality aftermarket flexplates can save money over factory parts, while performance flexplates cost more.
4. Shop Labor Rates
Dealers often charge more per hour than independent shops, and city shops usually charge more than rural ones. Many jobs take most of a workday.
5. Extra Repairs
While the transmission is out, shops often replace the rear main seal, transmission fluid and gaskets, or a worn starter. These add cost but save paying for a second teardown later.
Signs of a Bad Flexplate
- Knocking or clunking from the bell housing area, especially at idle or when shifting
- A grinding or whining noise when starting
- Vibration that changes with engine speed
- Starter that spins but doesn’t engage, often from damaged teeth
- Visible cracks found during inspection
Common Causes of Flexplate Failure
- Loose or broken flexplate or torque converter bolts
- Misalignment after transmission work
- Starter problems that grind the ring gear
- Heat cycles and metal fatigue with age
- Heavy towing or performance modifications
Keeping up with maintenance on tow vehicles and RVs saves money over time; see what it costs to replace RV tires. If you off-road, avoid drivetrain shock during recovery with these recovery tips and ways to go off road without damage.
FAQ: Cost of Replacing a Flexplate
Can I drive with a cracked flexplate?
It’s not recommended. A cracked flexplate can break and cause more damage or leave you stranded.
Why is flexplate replacement so expensive?
The part is cheap compared with labor, since the transmission must be removed.
Can I replace a flexplate myself?
Experienced DIYers can, but it requires lifting equipment and transmission removal.
Is a flexplate the same as a flywheel?
No. Flexplates are used with automatic transmissions; flywheels are used with manuals.
Final Thoughts
The cost of replacing a flexplate is mostly labor, typically totaling about $800 to $1,800 depending on your vehicle. Get quotes from a couple of shops and ask about replacing seals and fluid while the transmission is out.
Resources
- PartCatalog, flexplate replacement cost guide
- RepairPal, flexplate labor estimates




