
Thank you for reading our post, please rate this article at the end.
Reading Time: 4 minutesLast Updated on October 28, 2026 by Paul Clayton
How high is a pontoon boat? Most measure about 7 to 10 feet from the bottom of the tubes to the top of the bimini, depending on tube size and whether the top is up. With the bimini folded, a typical pontoon is around 6 to 7 feet tall off the water. On a trailer, add roughly 1.5 to 2 feet, so many pontoons stand about 8 to 9 feet tall with the top down and 10 feet or more with it up, which is why they often won’t fit through a standard garage door.

Table of Contents
Key Takeaways
| Measurement | Typical range |
|---|---|
| Tube bottom to deck | About 2 to 3 feet (25- to 27-inch tubes plus brackets) |
| Railing (fence) height | About 30 to 34 inches above the deck |
| Bimini top | About 4.5 to 6 feet above the deck when raised |
| Overall, bimini down | About 6 to 7 feet |
| Overall, bimini up | About 7 to 10 feet |
| On a trailer | Add roughly 1.5 to 2 feet |
| Standard garage door | Usually 7 or 8 feet tall |
Pontoon Boat Height, Part by Part
- Tubes: Most pontoons use tubes about 23 to 27 inches in diameter. Bigger tubes and tritoons sit higher.
- Deck and brackets: The cross-members and decking add several inches above the tubes.
- Fence: Railings rise roughly 30 to 34 inches above the deck.
- Bimini or canopy: A raised bimini adds about 4.5 to 6 feet above the deck so people can stand underneath.
- Arch or tower: Ski arches, radar arches and sport towers can push height higher than a bimini. Many fold down for storage.

Pontoon Boat Height on a Trailer
Trailers lift the boat so the tubes clear the axles and bunks. That usually adds about 1.5 to 2 feet. A pontoon that’s 6.5 feet tall on the water with the bimini down may stand about 8 to 9 feet on the trailer, which is taller than most residential garage doors. Low-profile trailers and folding biminis help. Always check bridge and overpass clearances when towing with a tower or bimini up, and fold covers down for highway travel.
What Affects Pontoon Height?
- Tube diameter and whether it’s a two-tube or tritoon
- Bimini, arch or tower style
- Trailer type: bunk, scissor or low-profile
- Load: more weight lets the boat sit lower in the water
- Accessories such as lights, antennas and speakers on top

How to Measure Your Pontoon’s Height
- Park on level ground with the boat on its trailer, or measure from the waterline at the dock.
- Measure from the ground (or waterline) to the highest fixed point, such as the bimini frame or arch.
- Repeat with the bimini folded and with any tower lowered.
- Write both numbers down and keep them in the truck for garages, storage units and low bridges.

Why Pontoon Height Matters
- Storage: Garages, carports and storage buildings have height limits.
- Bridges: Low bridges on rivers and canals can block pontoons with tops raised.
- Towing: Overpasses and drive-throughs are a real hazard.
- Boat lifts and covers: Lift canopies and covers must be sized correctly.
Related reading: how much a pontoon boat weighs, how many people fit on a pontoon and are pontoons pressurized.
FAQ: How High Is a Pontoon Boat?
Will a pontoon boat fit in a garage?
Usually not with a standard 7-foot door, and only sometimes with an 8-foot door and the bimini down. Measure first.
How tall is a pontoon with the bimini up?
Roughly 7 to 10 feet from the tube bottoms, more on a trailer.
How high off the water is a pontoon deck?
Typically about 2 to 3 feet, depending on tube size and load.
Are tritoons taller than pontoons?
Often slightly, because they tend to use larger tubes and taller brackets.
Can you lower a pontoon bimini for bridges?
Yes. Most biminis fold down quickly, and many arches are hinged.
Final Thoughts
Most pontoon boats stand about 7 to 10 feet tall with the bimini up and around 6 to 7 feet with it down, plus another couple of feet on a trailer. Measure your own boat both ways and keep the numbers handy for storage, towing and low bridges.
Resources
- Pontoon manufacturer spec sheets (overall height and tube diameter)
- Trailer manufacturer specifications
- Garage door industry standard sizes




